TIPS ABOUT HOW TO Extend Smok Pen Recharge Time


TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is a new pen that was developed by two guys in California. They wanted to develop a cool writing instrument that looked like a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.

smok pen

The Smok Pen includes a built quality that is just great. I came across that even though it can be an electronic pen the construction is just as good as any of the pens that I’ve reviewed. The reason being of how they made the very best cap. You don’t have to be worried about the cap cracking or breaking you Smok Valve Pen.

The two biggest differences that separate the Smok Valve from other pens may be the shape of the coils and just how that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I think that they did this on purpose, to help make the pen feel more substantial.

If you take a glance at a Smok Pen, you will observe that the body of the pen is round and not smooth like other pens. On the back of the pen there is a little tab that houses the coil. Once you press on the tab you can actually turn the heating element on / off. I must say i liked this feature because it allows me to use the Smok Pen 22 whenever I feel like smoking.

To utilize the Smok Pen you have to keep the heat button pressed. Once the button is pressed, the heating element will start to warm up. Once it gets to the appropriate temperature it is possible to switch off the heating element. Smok recommends utilizing a 22mm tank. I prefer a larger tank, but that’s just me.

Once you put your Smok Pen in to the tank you will notice a indicator light seriously. The indicator light will remain green unless you put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen into the charger before you apply the e-liquids to the coil heads. It is also important to do that before putting your e-liquids in to the coil heads.

After you have completed this step, it is best to check to see for anyone who is at the proper temperature for the coils to fire. If not then you should turn the energy off and try again. In case you are still not satisfied together with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is what I’d call the “troubleshooting process” because sometimes things just do not work as they should. It is suggested that you perform the following two steps, then go on and check the Smok Pen to see if it still gets the electronic charging port.

Before you go any further you should remove the battery from your pen and unscrew the magnetic cap. You should then remove the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body that is green in color. You need to loosen this wire using pliers. When you have loosened this wire you can then access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it in to the Smok pen’s electrical port, being careful to not touch the coils.

When you have placed the sub-ohm tank into the pen you need to then place all of those other components like the wattage, the batteries and the heating element into the included microwaveable microwave oven. Start the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it back off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set then you should follow the on screen instructions.

Once the Smok Pen has reached the temperature that it requires to reach you need to then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The ultimate step would be to connect the positive cable to underneath of the Smok’s on / off switch.

After all the components have been placed into the pen, you should turn the power on. Following the first test run, you need to be able to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a brand new one. For your convenience there is also a green light which might be pressed to be able to confirm the battery charging status. When you have done these things and you also do not start to see JUUL Pods the green light indicating charging, you should replace the battery.